Portable optical fiber laser marking machine

Model introduction

Optical fiber laser output laser, and then by ultra high speed scanning mirror system to achieve marking function, optical fiber laser marking machine, the use of air cooling method, cooling, high reliability, high reliability, long service life, energy saving, can be carved metal materials and some non-metallic materials, mainly used in depth, smoothness, precision requirements, such as mobile phone stainless steel ornaments, clock, mold, IC, mobile buttons and other industries, can be in metal, plastic and other surface marked speed is the traditional first generation lamp pumped 12 ~ 3 times.

Performance features

Excellent beam quality: compared with the traditional solid laser marking, the output of its base mode, the focus spot diameter less than 20um. The divergence angle is only 1 / 4 of the LD pumped laser. Especially suitable for precision, fine marking.

The use of low cost: electro optical conversion efficiency of 30%. The power consumption of the whole machine is 600W, which is the 1 / 10 of the pump laser marking machine, and the 3 / 1 of the semiconductor laser marking machine.

Maintenance free, long life: using laser diode as the pump source, the full closed optical path design, the average no fault working time more than 100000 hours.

Processing speed: processing speed is 5-10 times the traditional laser marking machine.

Portable small box: small area, convenient production site flexible adjustment station.

Application range

1. Auto parts: the body, frame, chassis, chassis, piston ring, shaft, bearing, clutch, lights, engine, a connecting rod, a cylinder, a piston, a cylinder sleeve, a gear, a water pump, a spring steel plate engraving factory number, production number, production date, name, trademark and other content; 2. Electronic components: resistors, capacitors, chip, printing circuit board, keyboard and so on.

3. Mechanical parts of all mechanical parts, machine tools, metal products, steel pipe, casing coupling, cone and the pump valve body, flange plate, a fastener marking; bearings, gears, standard parts, motors and other.

4 instruments: panels, signs, precision instruments, etc..

5: hardware tools, measuring tools, cutting tools, locks etc..

6 daily necessities: handicrafts, zipper, key buckle, jewelry rings, sanitary ware, etc..

Marking material

Metals: gold, silver, copper, alloy, aluminum, steel, iron, stainless steel, nameplate, marking data, serial number, date of production; engraved dial

Plastic: plastic case PC ABS (engineering plastics, hard plastic), etc....

Technical parameters

Device model CE-F10C/20C/30C

Power 10W/12W/20W/30W

Repetition rate 20-100KHz

Marking 100 * 100mm (optional 70-250mm format)

The engraving depth is less than 0.5mm

Engraving speed is less than or equal to 12000mm/s

Minimum Xian Kuan 0.01mm

Minimum character 0.15mm

Repeat accuracy 0.002mm

Electricity demand 220 + 5%VAC/50Hz/5A

Rated power 600W

Dimensions 210mm x 710mm x 480mm