Equipment introduction:
Laser spot welding CE-D150H mainly aiming at welding of thin wall materials, precision parts, realize the spot, butt welding, lap welding, seal welding. The process of spot welding is heat conduction type, that is, the surface of the workpiece is heated by laser radiation, and the surface heat is diffused through the heat transfer.
Equipment characteristics:
1, high depth width ratio
2, the weld width is small
3, can be precisely controlled, focusing on small, high precision positioning, easy to achieve automation.
4, high depth ratio, small welding width, small heat affected zone, small deformation, welding speed.
5, light spot size electric adjustment.
6, the working table can be three-dimensional mobile.
Application industry:
Widely used in jewelry, golf head, medical equipment, aluminum alloy denture, instrument, electronic, especially for gold and silver jewelry to fill holes, spot welding, sand hole, patch sewn lines and components embedded claw foot parts etc..
Main technical parameters:
Wavelength 1064nm
Maximum power 150W
Laser frequency 0.1-30Hz
The concentrating cavity of the British ceramic condenser cavity
Chiller cooling power 1P
Positioning accuracy 0.02mm
Power supply voltage 220V/ single phase /50Hz/30A |
Constant Company Home
ST Robotics Column
MRW Workholding System
