IPG fiber laser marking machine

Equipment introduction:

ZY-IPG10A fiber laser marking machine IPG using fiber laser output laser, and then through the high-speed scanning system to achieve high speed scanning. The electro optical conversion efficiency is high, the cooling of the air cooling method, the small size of the whole machine, the quality of the output beam and the high reliability. Can be carved metal materials and parts of non-metallic materials, mainly used in the depth, smoothness, fine degree requirements of the field, such as clocks, mold industry, the bitmap marking, etc.. The laser marking machine is mainly used in high-end electronic, communications industry, etc..

Equipment characteristics:

] excellent beam quality: IPG fiber laser marking machine ZY-IPG10A beam quality than the traditional solid laser marking machine is much better, focusing spot diameter less than 20um. The divergence angle is the 1/4 of a semiconductor pumped laser. Especially suitable for precision, fine marking.

] uses low cost: electro-optic conversion efficiency reaches 30%, the whole power consumption of about 300W, lamp pumped solid laser marking machine 1 / 15, significant savings in energy costs.

- maintenance free operation: laser without any maintenance, also do not adjust or clean the lens.

] laser with long service life: IPG fiber laser marking machine ZY-IPG10A using diode laser as the pump source, the average work time of up to 40, 000 hours.

The small size, suitable for harsh environment: laser through fiber laser has the advantages of compact structure, transmission distance. Cooling effect is good, no need for a large water cooling system, just simple air cooling.

In a certain impact, vibration, high temperature or dusty environment can work normally. Processing speed: processing speed is 2-3 times the traditional laser marking machine.

The minimum power laser marking machine, power consumption is 200W.

The performance of the equipment is stable, high positioning accuracy, 24 hours of continuous work.

Application industry:

The third generation laser marking machine system, mainly used in the depth, smoothness, fine degree requirements of the field, such as mobile phone stainless steel ornaments, clocks, mold, IC, mobile buttons and other industries, the bitmap marking, can be in the metal, plastic and other surface carved exquisite pictures.

Main technical parameters:

Type CE-IPG20A

Laser wavelength 10.6nm

Laser power 10W

Laser repetition rate 0kHz-100kHz

Minimum Xian Kuan 0.12mm

The marking speed is less than 250 /s

Marking depth is less than or equal to 18mm (by materials)

Repeat accuracy 0.01mm

Tag range 100x100mm

Cooling mode air cooling

Working power supply AC220V/50Hz/2.